Ever had to give up during a race because of a broken clutch or brake lever? That will never happen again – these levers are designed to fold away on contact with the ground.
Ever had to give up during a race because of a broken clutch or brake lever? That will never happen again – these levers are designed to fold away on contact with the ground.
Ever had to give up during a race because of a broken clutch or brake lever? That will never happen again – these levers are designed to fold away on contact with the ground.
The Twinwall, in Husqvarna blue design, combines two handlebars in one: An maximum guaranteed exterior strength against external damage (e.g. falling over) and is also anodized against corrosion. The interior, made of a special alloy, is also hard anodized to protect it from damage by the handlebar controls. Nylon inserts in the inner tube allow thinner walls. This saves weight and has a positive effect on the flexing properties. Rubber seals at the crossing points of the two tubes to prevent the ingress of water, dirt, cleaning agents, and other contaminants. Comes with handlebar padding.
Left-hand version, light and robust.
Prevents the carburettor from icing up in winter riding conditions.
Ensures significantly higher power output and is required for use of the X2 light on all TE models. We also recommend extra power when using other additional electrical components, e.g. fan, heated grips, etc.
Only for use on 2-stroke bikes with electric starter, since a battery is required!
The closed, two-component plastic handguards feature a black centre section that offers maximum strength for optimum protection. The colourful upper and lower parts are highly flexible and endure even the roughest of treatment without complaint. Available in two different heights.
The closed, two-component plastic handguards feature a black centre section that offers maximum strength for optimum protection. The colourful upper and lower parts are highly flexible and endure even the roughest of treatment without complaint. Available in two different heights.
These CNC-machined, high-strength aluminium handlebar risers are extremely robust thanks to their special screw fastening (from below) on the triple clamp. Twisting and bending are therefore practically impossible. Use of these handlebar risers is only possible on CNC-machined triple clamps. Available in three different heights. 10 mm
These CNC-machined, high-strength aluminium handlebar risers are extremely robust thanks to their special screw fastening (from below) on the triple clamp. Twisting and bending are therefore practically impossible. Use of these handlebar risers is only possible on CNC-machined triple clamps. Available in three different heights. 20 mm
These CNC-machined, high-strength aluminium handlebar risers are extremely robust thanks to their special screw fastening (from below) on the triple clamp. Twisting and bending are therefore practically impossible. Use of these handlebar risers is only possible on CNC-machined triple clamps. Available in three different heights. 30 mm
With this bracket the pull switch has an accessible, defined location. Recommended in combination with the Y junction 777.11.979.044.
We recommend use of this auxiliary wiring harness with all power consumers. With this wiring harness, you also have the option of fitting such power consumers as grip heaters or fans to your TC or FC. Please note: The power consumer is now connected directly to the battery. Consequently, the battery is also drained when the engine is not running, unless the consumer is switched off. Options available: Y-distributor 777.11.979.010 or 777.11.979.044.
The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 777.11.979.000.
The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 777.11.979.000. The connected power consumer can be switched off with the integrated switch. This prevents the battery from being drained unnecessarily.
The closed, two-component plastic handguards feature a black centre section that offers maximum strength for optimum protection. The colourful upper and lower parts are highly flexible and endure even the roughest of treatment without complaint. Available in two different heights.
The closed, two-component plastic handguards feature a black centre section that offers maximum strength for optimum protection. The colourful upper and lower parts are highly flexible and endure even the roughest of treatment without complaint. Available in two different heights.
Forged Husqvarna accessories brake and clutch lever provide you with the following benefits:
Forged Husqvarna accessories brake and clutch lever provide you with the following benefits:
Who hasn’t had to interrupt a training session or even abandon a race due to a snapped throttle cable? This simple-to-fit, aluminium part reduces this risk to a minimum. The protector is simply attached to the throttle cable guide on the throttle grip, thereby preventing the throttle cable from snapping.
To assemble the hour counter 813.12.920.000 on the triple clamp.
Ensures warm hands, even in bad weather. May only be fitted by an authorized Husqvarna dealer. We recommend use of auxiliary wiring harness 777.11.979.000 for installation.
Our lithium-ion batteries boast the following benefits:
Technical data:
Battery compartment 250.11.955.044 is additionally required for mounting on FC models from 2016.
Thanks to splitting of the surfaces, these open, very light Husqvarna handguards ensure an uncompromising racing look in the angular Husqvarna design. In two-component injection moulding technology:
Attached directly at the levers with a special mounting.
CNC-machined, easily adjustable offset: 32.5 mm or 35.5 N/mm. Front wheel and fork need not be removed for adjusting the offset. Includes steering stem tube and lower steering head bearing. For mounting the handlebar, one of the five handlebar supports (78901939044, 78901939144, 59501039244, 78901939344 or SXS07125200) is also required.
CNC-machined, easily adjustable offset: 32.5 mm or 35.5 N/mm. Front wheel and fork need not be removed for adjusting the offset. Includes steering stem tube and lower steering head bearing. For mounting the handlebar, one of the five handlebar supports (78901939044, 78901939144, 59501039244, 78901939344 or SXS07125200) is also required.
CNC-machined, easily adjustable offset: 32.5 mm or 35.5 N/mm. Front wheel and fork need not be removed for adjusting the offset. Includes steering stem tube and lower steering head bearing. For mounting the handlebar, one of the five handlebar supports (78901939044, 78901939144, 59501039244, 78901939344 or SXS07125200) is also required.
CNC-machined, easily adjustable offset: 32.5 mm or 35.5 N/mm. Front wheel and fork need not be removed for adjusting the offset. Includes steering stem tube and lower steering head bearing. For mounting the handlebar, one of the five handlebar supports (78901939044, 78901939144, 59501039244, 78901939344 or SXS07125200) is also required.
CNC-machined, easily adjustable offset: 32.5 mm or 35.5 N/mm. Front wheel and fork need not be removed for adjusting the offset. Includes steering stem tube and lower steering head bearing. For mounting the handlebar, one of the five handlebar supports (78901939044, 78901939144, 59501039244, 78901939344 or SXS07125200) is also required.
This bar pad not only provides you with optimum protection; you also have a constant eye on the time thanks to the time card pocket on top. An additional small pocket also lets you take smaller utensils, such as keys, cash or vehicle documents, with you. Can also be fitted in combination with the PHDS handlebar damping system.
With the quick turn throttle, rotation of the throttle twist grip is reduced by approx. 10%. That’s how to do a holeshot!
Ever had to give up during a race because of a broken clutch or brake lever? That will never happen again – these levers are designed to fold away on contact with the ground. Suitable for all hydraulic Brembo® clutch fittings.
Optimum protection against blisters on the thumbs with these coated neoprene rings. Simple to slide onto the grips.
Know exactly when the next service is due.
Ever had to give up during a race because of a broken clutch or brake lever? That will never happen again – these levers are designed to fold away on contact with the ground. Suitable for all hydraulic Brembo® brake systems.
Forged Husqvarna accessories brake and clutch lever provide you with the following benefits:
The revolution in lighting technology: This lightweight, ultra-bright headlight turns night into day. Ideal for all 24-hour racers. Fitted in a matter of seconds. A stator kit needs to be fitted for use on some Husqvarna models (see stator kit info).
The CNC-machined handlebar mounting with cushioning rubber inserts relieves wrist and shoulder joints. Further benefits of the PHDS: